This sale starts 4 April and is WHILE SUPPLIES LAST! Make sure to use your EGoodies host code to earn towards a shopping spree. If you see something you want, get it now!

I signed up for 4 swap groups this round, which was a lot of work while also finishing up coursework and taking final exams! This swap uses the Layered Stripes Background stamp and a greeting from Love for You in the Mini Catalog.

The Stamparatus, once again, came in handy when stamping the background as I was able to reink and apply pressure to areas I missed on the first stamp in order to create a crisp, clean image. I utilized a few different techniques in making this card, being Tone-on-Tone, Heat Embossing, and using scraps within the card design! The background is stamped in Starry Sky on Starry Sky cardstock, creating a Tone-on-Tone look. The “congratulations” message fit very nicely in the negative space of the background stamp, which I heat embossed in white for a bit of shine and pop from the paper.

My favorite innovation was using the scraps I cut from the Tahitian Tide mid-layer as an embellishment in order to create a more interesting composition. Each Tahitian Tide layer created two 1/4″ scraps when trimmed down to 4″x5 1/4″ from 4 1/4″x5 1/2″. I then glued these scraps over two diagonal negative space stripes and once dry, trimmed them flush with the layer using my Stampin’ Trimmer. Finally, I tied a vertical ribbon and bow around the top layer, which was difficult with large hands attempting to use as little ribbon as possible. I actually had just enough to finish my last swap of this design with none left to spare!

With Sale-a-Bration going on right now, it’s the perfect time to score a Mini Cut & Emboss machine (in one of our future In Colors) for effectively $30 (down from $63) when joining my team of Stampologists! See below for more information about the special for joining Stampin’ Up!

Non-consumable Ingredients

Consumable Ingredients

Join my team during Sale-a-Bration for an amazing deal!

I signed up for 4 swap groups this round, which was a lot of work while also finishing up coursework and taking final exams! This swap uses the Sweet Citrus bundle in the Mini Catalog,

I used my Cut & Emboss machine a lot when making my swaps, which was rather difficult when working at my desk in my dorm, thankfully I also have the Mini Cut & Emboss machine which was much easier to maneuver in the small space. It also made it easier to keep my dies in place which I did with a bit of scotch tape to keep my margins even (remember, stamp then cut!). The Stamparatus came in handy when stamping the Blood Oranges as I could use both plates to stamp the Pumpkin Pie and then the Cherry Cobbler.

With Sale-a-Bration going on right now, it’s the perfect time to score a Mini Cut & Emboss machine (in one of our future In Colors) for effectively $30 (down from $63) when joining my team of Stampologists! See below for more information about the special for joining Stampin’ Up!

The banners are cut using the Stylish Shapes dies, with the Cherry Cobbler ends being the smallest banner cut in half and glued on the two ends for a long background banner feel without having a die for that! I embellished the background using the Wink of Stella brush on the leaves and Pumpkin Pie on the oranges in the background using our Blending Brushes.

Non-consumable Ingredients

Consumable Ingredients

Join my team during Sale-a-Bration for an amazing deal!

I signed up for 4 swap groups this round, which was a lot of work while also finishing up coursework and taking final exams! This swap uses Love for You bundle in the Mini Catalog, which I came up with this design, wanting to include the Pool Party ribbon and a design of Designer Series Paper, of which I used the Sale-a-Bration Dainty Flowers DSP.

I used my Cut & Emboss machine a lot when making my swaps, which was rather difficult when working at my desk in my dorm, thankfully I also have the Mini Cut & Emboss machine which was much easier to maneuver in the small space. It also made it easier to keep my dies in place which I did with a bit of scotch tape to keep my margins even (remember, stamp then cut!). I was also able to use some of the extra Mossy Meadow layers from the Thanks a Bunch card to add some unique layering.

With Sale-a-Bration going on right now, it’s the perfect time to score a Mini Cut & Emboss machine (in one of our future In Colors) for effectively $30 (down from $63) when joining my team of Stampologists! See below for more information about the special for joining Stampin’ Up!

The DSP squares are 4″ by 4″ which allows for 9 squares to be cut from one sheet of 12″ by 12″ DSP. Another trick is to tie the bow while it is still attached to the spool so you don’t accidentally cut it too short or have too much extra ribbon in the bow.

Non-consumable Ingredients

Consumable Ingredients

Join my team during Sale-a-Bration for an amazing deal!

I signed up for 4 swap groups this round, which was a lot of work while also finishing up coursework and taking final exams! This swap uses the Sale-a-Bration exclusive Thanks a Bunch set featuring carrots, which I came up with this design, hoping that it would be unique and a more modern take on cards going around for this catalog.

The most important tool I used in making this card is the Stamparatus, which helped me space out the carrots on the paper to give me 1) even margins, and 2) reproducibility! What I ended up doing was stamping the top row first for all of my cards, moving the plate down one notch for each carrot, then turning the paper 180°, repositioning the carrot, and stamping in the blank space, leaving one carrot spot blank to stamp it in Blackberry Bliss for our one-of-a-kind purple carrot.

I wanted to add some sparkle and ended up putting three rhinestones in descending sizes on the bottom left corner (which is inconveniently covered by my watermark), but I also played around with bedazzling the purple carrot with rhinestones and using Wink of Stella glitter brush.

Non-consumable Ingredients

Consumable Ingredients

Join my team during Sale-a-Bration for an amazing deal!

Click here to place an order

*After each order placed with the monthly code, you are eligible to earn one stamp per $50 in an order (before shipping/tax… the same number of $50 SAB items you would earn)
*Orders $150 and more earn their own Host(ess) Rewards! Don’t use the monthly host code in this case!
*Collect 10 stamps and redeem for EGoodies!
*EGoodies is equivalent to a shopping spree up to $50, subject to availability
*Track your stamps on the form located on EvanStamps.com. When you’ve reached 10 stamps, complete the rest and redeem!

ORDER ANYTIME at MyStamp.Store – make sure to use the December EGoodies code at checkout!

Check out the clearance rack HERE and last chance products HERE!

Paper Only Share – $50 ($58 mailed USPS Priority) [$40/$48 for Stampologists Team Members]
Ribbon Only Share – $20 ($28 mailed USPS Priority) [$15/$23 for Stampologists Team Members]
Paper & Embellishment Share – $65 ($73 mailed USPS Priority) [$55/$63 for Stampologists Team Members] ** Preorder Paper & Embellishment Share in the EARLY period and earn TWO EGoodies Stamps!

Dates

EARLY Preorder Period – 1 December 2022 – 4 January 2023
EARLY Payment Due – Upon Order
EARLY Products Ordered/Prepared 5 January – 15 January 2023
EARLY Ready for Pickup/to be Mailed (Approx. or before) – 16 January 2023

REGULAR Preorder Period – 5 January 2023 – 31 January 2023
REGULAR Payment Due – Upon Order
REGULAR Products Ordered/Prepared – 1 February – 15 February 2023
REGULAR Ready for Pickup/to be Mailed (Approx. or before) – 16 February 2023

Details

Paper Only Share includes 6×6 sheets of all 12×12 Designer Series Paper, 12×12 Specialty Designer Series Paper, 6×6 Designer Series Paper, and 6×6 Specialty Designer Series Paper, and 6×6 Shimmer Paper. 14 different individually packaged and labeled packs, equivalent to 1/4 of the complete paper package (does not include host-only paper).

Ribbon Only Share includes the equivalent of 1/5 of the complete spool of ribbon, 6 products (9 designs/colors total), 1 or 2 yards depending on the product.

Paper & Ribbon Share Includes

• 6×6 sheets of all 12×12 Designer Series Paper, 12×12 Specialty Designer Series Paper, 6×6 Designer Series Paper, and 6×6 Specialty Designer Series Paper, and 6×6 Shimmer Paper. 14 different individually packaged and labeled packs, equivalent to 1/4 of the complete paper package
• the equivalent of 1/5 of the complete spool of ribbon, 6 products (9 designs/colors total), 1 or 2 yards depending on the product
• Free Gift: Mystery Embellishment from the new catalog ($7-$9.50 value)

* Subject to product availability. If I am not able to complete the paper share, I will do my best to refund you the full amount you paid. Payment is due upon preorder and is not refundable after the preorder period has ended.

Shop anytime at MyStamp.Store & find out more about EGoodies here!

NOTEZ BIEN: I have a Black Friday-Cyber Monday gift-with-purchase coming up, so make sure to check out my Instagram to find out the deals!

I tend to select paper as my Sale-a-Bration product-with-purchase, so I have a ton of the foil 6×6 DSP and the Rings of Love DSP. I’m having a hard time figuring out what to do with the Foil DSP, so Rings of Love it is.

DSP is really useful when you want to make simpler cards, as you can use it for a complex background without a ton of labor. In this case, I cut the 12×12 DSP into 6 pieces (4″x6″) and trimmed the pieces down to 4″x5 1/4″ to become my first layer.

This project used Night of Navy cardstock as the base, Night of Navy and Mint Macaron Inks, and Watercolor Shapes and Amazing Phrasing Photopolymer Stamp Sets. I wanted a fun embellishment but wasn’t feeling a Mint Macaron heart, so I opted to add some Iridescent Pearl Embellishments.

Here’s the final result!

Ingredients (Consumable and Non-Consumable)